( full specifications are in the manual for the device )
1. The mKUK crane control controller is designed to control the crane,
can be used in various automation systems - telemechanics, ACS GRS, linear KP of main gas pipelines, etc.
2. The controller is available in two versions: for faucets with a control voltage of 24V and 110V.
1. The technical characteristics of the mKUK controller are given in the table
2. The mKUK controller is intended for operation outside explosive zones in rooms at ambient temperature
air from minus 40 to plus 60 °C.
3. The degree of protection of the mKUK case against the effects of the environment is IP30
4. The service life of mKUK is not less than - 12 years.
|
|
|
|
| 1. Supply voltage |
|
|
| 2. Current consumption, no more |
|
|
| 3. Number of input signals |
|
|
| 4. Input voltage |
|
|
| 5. Input current, no more |
|
|
| 6. Number of output (switched) signals |
|
|
| 7. Switched voltage |
|
|
| 8. Switched current, no more |
|
|
| 9. Overall dimensions, no more |
|
|
| 10. Mass is no more |
|
|
1. The mKUK crane control controller is made in a plastic case with brackets for mounting on a DIN rail.
2. The controller can be placed outdoors and protected from direct exposure to atmospheric precipitation or indoors
outside the explosive zone and be fixed on a flat support in any working position.
3. The company provides warranty service for the mKUK crane control controller for 24 months and service
maintenance throughout the service life.
Crane control controller mKUK. Manual