1. Limits of permissible relative error of PK-V in the calculation of flow and volume (mass) (excluding meter error) range from ±0.3 to ±1.0% (depending on the error of pressure transducers) and the spectrum of the medium pressure configuration.
2. Limits of the permissible basic reduced error of the complex during measurements and conversion into an absolute code signal (excess) pressure are ± 0.075; ±0.1;  ±0.15  or   ±0.25%.
3. Limits of the permissible basic error of the complex when measuring and converting to a code output signal temperatures are ±0.1 °C or  ±0.3 °С (depending on the order).
4. Limits of permissible relative error of the complex when processing input signals The calculation of the medium parameters is ±0.02 %.
5. The complex provides setting of the upper limit of pressure measurements (according to the order) in the range:
  • from 100 kPa to 16 MPa - for absolute pressure;
   • from 6.0 kPa to 25 MPa - for excess pressure;
6. The temperature measurement range is set (according to the order) in the range from minus 40 to plus 120 °С.
7. PK-V calculators allow you to store records of instantaneous, operational, temporary, daily data, emergency and emergency situations, operator intervention in the operation of the complex according to the PC-B polling cycle in one second using the equipped card memory for the last 60 days.
8. If necessary, the card can be removed to read information on a PC (computer). This procedure requires use the program CONCOR
    The maximum period of time for which records are stored in the memory of the calculator for each pipeline:
      - daily data . . . . . . . . . - for the last six months
      - hourly data . . . . . . . . - for the last two months
      - operational data . . . . - at least 3600 records
  • messages about emergency and emergency situations - 1000 records,
  • intervention - 1000 entries.
9. The complex provides the ability to interact with the operator through a PC connected to the PC-V via a communication channel at speeds from 300 to 38400 bps.
10. The complex is powered by an external DC power supply with a nominal voltage of 12 V.
   The complex has a backup DC power supply (battery) with a nominal voltage of 12 V, which ensures the safety of the measured information and stable operation of the complex for at least 100 hours.
11. The power consumed by the FLOUTEC-TM-2 modification complexes (excluding the presence of a flowmeter) does not exceed - 3.8 VA;
12. The service life of FLOUTEC-TM-2 measuring complexes is guaranteed by the company for at least 12 years.
13. The company provides warranty service for FLOUTEC-TM-2 within 18 months from the date of commissioning and service service throughout the entire service life.