( full specifications are in the manual for the device )
1. The RS485/BELL202 interface converter is designed for
conversion of input electrical signals by type:
- BELL202 standard;
-pulse (NAMUR);
- discrete;
to the electrical coded (digital) output signal of the RS485 standard.
2. The transmitter is not a measuring instrument.
3. Operation of the RS485/BELL202 Interface Converter is allowed at an ambient temperature of minus 40 to plus 60 °С.
1. Power supply parameters of the RS485/BELL202 interface converter from an external DC source:
- rated supply voltage - 12 V
- allowed value from 8 to 16 V (maximum - 27 V, not tested).
– own consumption current . . . . . – no more than 15 mA.
– consumption power . . . . . . . - no more than 0.6 W.
2. RS485/BELL202 interface converter provides:
- output voltage of the line shaper . . . . . . - from 10 to 22 V;
– maximum output current . . . . . - no more than 150 mA.
- the number of generated lines for connecting peripheral devices - 1.
3. The overall dimensions of the transducer do not exceed 120 x 100 x 25 mm.
4. The mass of the converter does not exceed - 0.2 kg.
5. Service life of RS485/BELL202 interface converter – 12 years.
1. The RS485/BELL202 interface converter is made in a plastic case with brackets for mounting
on a DIN rail. In this case, the converter must be protected from direct exposure to atmospheric precipitation.
2. The company provides warranty service for RS485/BELL202 interface converter within 24 months and service
service throughout the entire service life.
Interface converter RS485/BELL202.