( full specifications are in the manual for the device )
1. The SH/RS232 interface converter is designed to work as a converter and signal transmission via
a dedicated two-wire line in half-duplex mode and a supply voltage generator for peripheral devices.
2. The transducer is not a measuring device.
3. Operation The SH/RS232 interface converter is allowed at an ambient air temperature of minus 40 to plus 60 °C.
1. Power parameters of the SH/RS232 interface converter from
external direct current source:
- nominal supply voltage - 12 V
- permissible values from 8 to 16 V (maximum - 27 V, not tested).
- own consumption current. . . . . . . . . . - no more than 100 mA.
- power consumption. . . - no more than 1.5 W.
2. The converter provides:
- output voltage of the line shaper. . . - from 10 to 22 V
- maximum output current, not more than . . . . - 150 mA
- the number of formed connection lines of peripheral devices. . . . - 1
3. The dimensions of the converter do not exceed 120 x 100 x 25 mm
4. The mass of the converter does not exceed - 0.2 kg
5. The service life of the SH/RS232 interface converter is 12 years.
1. The converter is made in a plastic case with brackets for mounting on a DIN rail.
At the same time, the converter must be protected from direct exposure to atmospheric precipitation.
2. The company provides warranty service for the converter for 24 months and service for 24 months
entire service life.
