( full specifications are in the manual for the device )
1. The interface converter controller belongs to the group of microprocessor devices and is equipped with a microcontroller
and memory for data storage.
The interface converter controller is designed to work in the gas industry as a communication controller
in systems of automatic control of technological processes.
2. The interface converter controller is not a measuring device.
3. Operation of the Interface Converter Controller is allowed at an ambient air temperature of
minus 40 to plus 60° C.
1. Power parameters of the Interface Converter Controller from an external DC source:
- nominal supply voltage. . . - 12 V;
- permissible values from . . . . . - 8 to 16 V;
- own current consumption at full load. . . . . . . - no more than 180 mA.
- power consumption at nominal voltage. . . . . . . . . . . . - no more than 2.2 W.
Power supply of HART lines:
- nominal. . . . . . . . . . - 12 V;
is permissible. . . . . . . . . . . - 8 - 16 V;
2. Speed of exchange of digital information on communication channels. . - 600 to 57,600 bps.
3. The dimensions of the Interface Converter Controller do not exceed . . . - 160 x 100 x 60 mm
4. The weight of the Interface Converter Controller does not exceed - 0.25 kg.
5. The service life of the Interface Converter Controller is 12 years.
6. The company provides warranty service for the Interface Converter Controller for 24 months and service
throughout the service life.
1. The controller-converter of interfaces is made in a plastic case with brackets for mounting on a DIN rail.
At the same time, the converter must be protected from direct exposure to atmospheric precipitation.
2. The controller-converter of interfaces is intended for use in an explosive zone and in rooms at a temperature
ambient air from minus 40 to plus 60 °C.
3. Climatic implementation of the Controller-converter of interfaces C-4 according to GOST 12997-84. The degree of protection against the actions of the environment
environment IP30 according to GOST 14254-80.
4. The company provides warranty service for the Interface Converter Controller for 24 months and service
throughout the service life.
